Occurrence of benzotriazoles (BTRs) in indoor air from Albany,New York,USA, and its implications for inhalation exposure

Despite the widespread use of benzotriazoles as corrosion inhibitors in many household goods, studies on the occurrence of these compounds in indoor air are scarce. In this study, five benzotriazole derivatives were measured in 83 indoor air samples collected from various locations in Albany, New York, USA. Benzotriazoles were found in a majority of the indoor air samples, and the concentrations of their sum in bulk (vapor plus particulate phases) indoor air ranged from below the method limit of quantification to 492 ng·m^?3 (geometric mean: 5.8 ng·m^?3). The highest geometric mean concentration was found in air samples collected in parking garages (155 ng·m^?3), followed by barbershops (13.6), public places (11.5), auto repair shops (5.2), automobiles (4.5), homes (4.5), offices (3.7), and laboratories (2.8). Inhalation exposure to benzotriazoles was calculated on the basis of the measured geometric mean concentrations and air inhalation rate. The highest exposure dose was found for teenagers, with a geometric mean inhalation exposure dose of 79 ng·day^?1. The body-weight normalized exposure dose, however, was the highest for infants, at 3.2 ng·(kg bw)^?1·day^?1.     

A mathematical model of crevice corrosion for buried pipeline with disbonded coatings under cathodic protection

Crevice corrosion occurs in a holiday and disbonded region between coating and pipeline steel. Cathodic protection (CP) is generally recognized as the most effective method for corrosion prevention of pipeline, but its effectiveness may be reduced at defects in a disbonded coating. It is difficult to measure and probe corrosion parameters accurately based on experimental work. Therefore, a mathematical model is necessary to identify the phenomena and mechanisms that contribute to the crevice corrosion process. In this work, a mathematical model was developed to determine the evolution of chemical and electrochemical transient processes of crevice corrosion in NaCl dilute solution, and the effect of cathodic protection and crevice width on corrosion of 20# steel pipeline with disbonded coatings. Results have demonstrated that the extent of crevice corrosion depends on the crevice geometry and could be influenced by the increase of crevice depth and decrease of its width. The oxygen concentrations drop significantly inside a crevice whether CP is applied or not and whether crevice width decreased or not. The pH values and conductivity of crevice solution increase with the time. The research provides a theoretical foundation for cathodic protection of pipelines and establishes an effective corrosion model which can identify the phenomena and mechanisms of the crevice corrosion process. This work could be used to help mitigate the corrosion failure of pipelines to prevent catastrophic accidents in oil, gas and chemical process industries.     

金属材料海水腐蚀试验方法的编制及标准解读

为了使相关人员更好地理解标准,更好地完成试验,回顾了我国金属材料海水腐蚀试验方法和标准的编制历程,对金属材料海水腐蚀试验的两个现行国家标准进行了解读和比较。     

甘肃典型地区电力接地网腐蚀规律与防腐对策研究

根据甘肃省地域气候、环境状况特点，选取典型变电站进行土壤理化性能测试，评价土壤的腐蚀性，并根据金属试片埋片失重法进行腐蚀速率及腐蚀性评价的验证，提出典型地区设计、施工、运营时的防腐措施。     

基于整车道路强化腐蚀试验的工况探讨

试验工况是否科学,可以通过对国内外常用试验方法的工况进行对比,发现其存在的差异性及侧重点,并通过调研对试验工况数据切合度进行验证。只有制定出合理的试验工况,才能为腐蚀数据库提供科学的数据支持。     

油田回注水中优势硫酸盐还原菌的分离鉴定与生理特性研究

从胜利油田回注水中筛选得到一株硫酸盐还原菌，命名为zsz1209。经过16SrDNA序列分析，鉴定zsz1209为梭菌属（Clostridium）。实验研究了zsz109的生理特性，并对通过调节环境pH来抑制菌株zsz1209生长繁殖的可行性进行了探讨。实验结果表明：菌株zsz1209的理想碳源为乙酸钠，在30～60℃之间可较好地生长；SOi浓度低至50mg／L时，生长未受到明显抑制。当培养环境pH高至8．5～9．0或低至3．5～4．0时，检测菌株zsz1209对SO4^2-和碳源（COD）的利用情况，发现zsz1209的生长受到明显抑制，结果表明利用改变环境pH来抑制微生物对油田的腐蚀具有可行性。     

高级氧化技术降解环烷酸的研究进展

针对原油及油砂洗脱废水中的环烷酸所具有的酸性、毒性、腐蚀性等特点，介绍了多种降解环烷酸的高级氧化技术，包括Fenton氧化法、臭氧氧化法、光催化氧化法、超临界氧化法、微波辐照法等。评述了高级氧化技术降解环烷酸的最新进展和发现，分析了各种技术的处理效果，并总结了各种技术的优缺点。最后，提出了处理石油行业环烷酸废水的一些思路，为现阶段石油行业环烷酸废水的处理提供了参考。     

军绿有机涂层和金属漆涂层全浸泡下的腐蚀行为对比研究

目的针对车辆装备长期在高盐雾、高湿热、高日照等恶劣的气候环境下使用,会受到腐蚀影响的现状,探究现役军用有机涂层防护性能。方法采用电化学阻抗谱技术研究军绿有机涂层和金属漆涂层在3.5%NaCl溶液中的腐蚀电化学行为,分析这两种涂层在浸泡期间的电化学阻抗谱特征,通过拟合等效电路得到涂层电阻R_c和涂层电容C_c,并用这两个电化学参数评价军绿有机涂层和金属漆涂层的耐蚀性能。结果军绿有机涂层抗腐蚀介质渗透能力很强,而金属漆涂层抗腐蚀介质渗透能力稍弱。结论两种涂层都表现出很好的防护性能,且金属漆涂层在腐蚀后期的防护性能要优于军绿有机涂层。     

海洋环境下ZL115-T5铸铝合金/C41500海军黄铜腐蚀行为研究

目的研究海军某型装备壳体结构材料在海洋环境下的腐蚀行为及规律。方法根据折算出的实验室加速腐蚀试验环境谱,开展了ZL115-T5铸铝合金试验件、ZL115-T5铸铝合金/C41500海军黄铜接触试验件、模拟实际涂抹黄油试验件以及模拟维护涂抹缓蚀剂试验件的实验室加速腐蚀试验。结果得到了该型铝合金在不同服役年限及服役状态下的腐蚀形貌、质量、平均腐蚀深度以及腐蚀损伤度变化规律。结论该型合金在不同服役状态下的腐蚀行为呈现差异化,ZL115-T5铸铝合金与C41500海军黄铜偶合接触会加速铸铝合金的腐蚀,黄油能够在一定程度上抑制电偶腐蚀,但效果并不明显。缓蚀剂能够延缓海洋环境下ZL115-T5铸铝合金腐蚀,其中THFS-10软膜缓蚀剂以及THFS-15长效硬膜缓蚀剂效果较好。     

富营养化淡水中黑色金属试样腐蚀加速的微生物学机制研究

目的探究黑色金属在污染淡水中后期腐蚀加速规律的生物学机制。方法采用高通量测序分析A3钢在富营养化水体和清洁水体中腐蚀产物内微生物的种群结构,并结合元素分析和XPS分析。结果获得了A3钢的腐蚀产物内微生物的门水平物种分布柱状图、OTU估计数统计表、OTU韦恩图、硫酸盐还原菌各属的相对丰度、微生物属水平热图等数据。结论在富营养化水体中,硫酸盐还原菌呈现更显著的水平,造成金属的硫化腐蚀更为严重,验证了黑色金属在富营养化污染淡水水体中后期腐蚀速率反转加速的现象。